Luminant CEO says EPA air plan would cost Texas big

Emissions-resize-150x150

The economic impact on Texas coal units from the re-dispatch from coal to gas is right in EPA's own modeling for the agency's Clean Power Plan, which would result in 72 million megawatt-hours of reduced output by the Texas coal fleet by 2020.

That's a 52% reduction of coal-fired generation from the 2012 baseline, said Luminant Chief Executive Officer Mac McFarland to an Aug. 15 joint workshop called by the Public Utility Commission of Texas and also attended by officials of the Railroad Commission of Texas and the Texas Commission on Environmental Quality.

The purpose of the meeting was for commissioners from the three agencies to gather information on the impact that the U.S. Environmental Protection Agency's proposed CO2-control rule will have on the state's electric generation and transmission, regulations, energy efficiency and what the costs would be.

Luminant has Texas' largest competitive power generation business. It operates in the Electric Reliability Council of Texas' (ERCOT) wholesale power market with a generation mix of coal, natural gas and nuclear energy, and it is one of the biggest purchasers of wind in the state and nation.

“The Clean Power Plan overlooks the impact on consumers in Texas and would require drastic changes to the ERCOT market,” McFarland said. “It not only overestimates the feasible efficiencies at existing power plants, but also the called-for steep increase in renewable energy sources. The plan disproportionately impacts Texas, and, in our opinion, it oversteps the law.

“As rolled out by the EPA, the Clean Power Plan is described as a vision to cut carbon dioxide emissions and fight climate change by providing states ‘flexibility' in developing ways to attain the proposed standards. But as lofty visions often do when they collide with reality, the Clean Power Plan is simply unworkable and doesn't balance the economy, energy supply, reliability and the environment.

“Taken all together, this is a pretty big price the U.S. - and, more specifically, Texas - are being asked to pay for a very small reduction in greenhouse gas emissionsthat we must remember are globally generated and transient. … U.S carbon emissions stood at 17 percent of the world total in 2011, with the power sector covering just over one third of that. Within the U.S. power sector carbon emissions, a majority came from coal. But some perspective is needed here.

Compared to the rest of the world, U.S. coal generation contributed less than five percent of the world total and Texas coal generation even less - lower than one percent. So what this plan expects from the nation and from Texas makes no difference when considered globally with China, Russia, India, developed countries and emerging economies all over the world, which have significant - and increasing - CO2 emissions.”

EPA's plan would also end the careful balance intended under the Clean Air Act, in which Texas and other states partner with the EPA to comply with the act, McFarland said. “We've seen this partnership work many times, most recently with the MATS rule. Instead, Texas would cede a significant portion of its authority to run its energy market to the EPA.

“We also don't think this rule is legal under the Clean Air Act. Simply, by trying to push its authority ‘beyond the fence line' of power plants into regulating Texas' entire energy sector from fuel sources to generation dispatch on the ERCOT grid to the end user, the EPA has pushed beyond what the act allows. Lawsuits have already been filed and doubtless more will come, and the courts will hear them. But beyond the legal questions, what's our view for what the rule means for the power generation sector? And for Texas? And what does it mean for Luminant, since about 70 percent of our generation comes from coal?”

Texas must bear 18% of the total U.S. carbon cuts under the plan, yet it is responsible for only 11% of carbon emissions in the 2012 baseline, McFarland said. Texas and many other states fall below the national average of 991 lbs/MWh. But on an absolute tonnage basis, make no mistake, Texas must reduce the most tonnage by far, he said.

This article was republished with permission from GenerationHub.

Sponsored by FLSmidth

Related Articles

Report: US energy storage market poised to grow 250% this year

Deployments for energy storage in the U.S. is expected to grow from 62-MW in 2014 to 220-MW in 2015 – a 250 percent increase- according to a report conducted by GTM Research and Energy Storage Association (ESA).

Siemens upgrades offshore wind turbine, increases capacity

Siemens’ (NYSE: SI) offshore wind turbine, the SWT-6.0-154, has reached a milestone for its gearless turbine design, increasing output capacity.

Follow Power Engineering on Twitter
Latest News

Dominion Virginia Power shelves plans for offshore wind project

Dominion Virginia Power, a subsidiary of Dominion (NYSE: D), put plans to build an offshore w...

Coal ash recycling company successfully repurposes pond ash

The SEFA Group Inc. recently opened a stand-alone Staged Turbulent Air Reactor (STAR) facilit...

Hawaii energy park, Sandia National Laboratories to test energy storage

The Natural Energy Laboratory of Hawaii Authority (NELHA) has secured a deal with New Mexico-...

E.ON, GE wind farm reaches operation in Texas

E.ON and GE's (NYSE: GE) Energy Financial Services celebrated the opening of the Grandview Wi...

Feds move to speed approval for Great Plains wind projects

Federal officials are moving to speed up their review of wind power projects across the Upper...

Sempra U.S. Gas & Power acquires Minnesota wind project

Sempra U.S. Gas & Power has acquired the 78-MW Black Oak Getty wind project — in Stearns ...

Mississippi Power to build largest utility-scale solar projects in the state

Mississippi Power, a subsidiary of Southern Company (NYSE: SO), is partnering with two solar ...

Another measure to block advance of NC renewables law falls

North Carolina electric companies must keep planning to generate more power through alternati...

Power Engineering Current Issue

02/01/2015
Volume 119, Issue 2
1502PE-cover
Products Showcase
Dynamic Fluoride Ion cleaning DFIC of industrial natural gas turbines Hi-Tech Furnace Systems

Dynamic Fluoride Ion Cleaning of IGT Parts

The Dynamic Fluoride Ion Cleaning (DFIC) Process from Hi-Tech Furnace Systems is able to clean deep, narrow cracks of oxides by cycling between negative, atmospheric, and positive pressure.

Archived Articles

2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015

Buyers Guide Product Listings

Engine Starting Systems

Ingersoll Rand air starters are flexible, effic...

Strikesorb Product Family

Only Strikesorb® Surge Protective Devices (SPDs...
Power Industry Wire News

Rockdale Resources Enters Into Letter of Intent to Acquire Working Interest in a Historical Oklahoma Oil Field

Rockdale Resources Enters Into Letter of Intent to Acquire Working Interest in a Histor...

Scorpio Tankers Inc. Announces Newbuilding Vessel Deliveries and Reminder for Upcoming Conference Call

Scorpio Tankers Inc. Announces Newbuilding Vessel Deliveries and Reminder for Upcoming ...

Falcon Crest Energy Searching for Opportunities Outside Oil and Gas Sector

Falcon Crest Energy Searching for Opportunities Outside Oil and Gas Sector

West Texas Resources, Inc. Announces Appointment of Paul Brogan to Board of Directors

West Texas Resources, Inc. Announces Appointment of Paul Brogan to Board of Directors

Younicos Commends U.S. Department of Energy Call for Energy Storage to Be Part of National Electricity Grid Infrastructure Improvements

Younicos Commends U.S. Department of Energy Call for Energy Storage to Be Part of Natio...

Power Engineering

Article Archives for Power Engineering Magazine

Continuing Education

Professional Development Hours

To access a course listing associated to a specific topic listed below, click on the topic of choice from the list below.

Latest Energy Jobs

View more Job Listings >>