Craig coal-fired power station Unit 1 expected to return to service in December

Japan burns record level of coal in August 2013

Tri-State Generation and Transmission Association Inc. expects the 428-MW Unit 1 at its Craig coal-fired power station in Colorado to return to service in mid-December, according to a report from Reuters. The unit shut on Sept. 7 because of significant water damage.

The company stated last week it moved a planned outage scheduled for spring 2014 forward to take advantage of downtime while workers fix the turbine. According to the report, workers from General Electric Co. are rebuilding the high pressure/intermediate pressure steam path components and rewinding the generator.

Unit 1 of the station is owned by Tri-State and four other regional utilities, according to Reuters.

Read more steam energy news

Sponsored by FLSmidth

Related Articles

FPSC approves PPA for Chesapeake Utilities to receive energy from CHP facility

The Florida Public Service Commission (FPSC) has approved a 20-year power purchase agreement (PPA) where Florida Public Utilities Co. (FPU), a subsidiary of Chesapeake Utilities Corp. (NYSE: CPK), will receive power from a 20-MW combined heat and power plant (CHP) in Nassau County, Florida. Eight Flags Energy is developing the project.

Cost Benefits of Critical Valve Repair in the Heat Recovery Steam Generator

Advances in gas turbine technology and efficiency have placed enormous demands on critical valves in thermal generation systems. Learn more about the cost of repair and replacement.

Follow Power Engineering on Twitter
Latest News
Siemens signs contract with Thailand for 18 industrial gas turbines

Siemens signs contract with Thailand for 18 industrial gas turbines

The units -- purchased by TEC Project Services Corporation (TPS), a subsidiary of the Japanes...
GE is supplying two sets of high-efficiency steam turbines and generators for Petrovietnam’s new coal-fired thermal power plant in Soc Trang.

Petrovietnam selects GE's high-efficiency steam turbines for new coal-fired power plant

GE is supplying two sets of high-efficiency steam turbines and generators for Petrovietnam’s ...
Duke Energy Renewables acquires 50-percent stake in Mesquite Creek Wind

Duke Energy Renewables acquires 50-percent stake in Mesquite Creek Wind

Duke Energy Renewables has acquired a 50-percent stake in Mesquite Creek Wind, a 211-MW wind ...
Co-op signs power purchase agreement for solar project in Colorado

Electric co-op signs solar power purchase agreement

Tri-State Generation and Transmission Association Inc. signed a 25-year power purchase supply...
US construction spending at highest level in seven years

US construction spending reaches highest level in 7 years

U.S. construction spending in July climbed to its highest level in more than seven years, boo...
GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE is launching its latest aeroderivative gas turbine, the LM6000-PF+, which employs technolo...
Sendai nuclear Unit 1 in Japan connects to power grid Kyushu Electric Power Co.

Sendai nuclear Unit 1 connects to grid

The Sendai 1 nuclear power unit in Japan is expected to reach commercial operations, almost t...
EPA allows one claim to stand in Sierra Club appeal of Schiller air permit

EPA allows one claim to stand in Sierra Club appeal of Schiller air permit

U.S. Environmental Protection Agency (EPA) Administrator Gina McCarthy signed a July 28 order...

Power Engineering Current Issue

02/01/2015
Volume 119, Issue 2
1502PE-cover
Products Showcase
GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE is launching its latest aeroderivative gas turbine, the LM6000-PF+, which employs technologies from four GE businesses, bringing power online faster and more efficiently than ever before.

Dynamic Fluoride Ion cleaning DFIC of industrial natural gas turbines Hi-Tech Furnace Systems

Dynamic Fluoride Ion Cleaning of IGT Parts

The Dynamic Fluoride Ion Cleaning (DFIC) Process from Hi-Tech Furnace Systems is able to clean deep, narrow cracks of oxides by cycling between negative, atmospheric, and positive pressure.

Archived Articles

2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015

Buyers Guide Product Listings

Boilers

Designs, manufactures, sells, leases and rents ...

Boilers

Designs, manufactures, sells, leases and rents ...

Boilers

Designs, manufactures, sells, leases and rents ...

Consulting Services

Design and analysis of power plant structures i...
Power Industry Wire News

KPIT Selected by UPPCO to Deliver New SAP(R) Software Implementation and Electric Utility Transformation Project

KPIT Selected by UPPCO to Deliver New SAP(R) Software Implementation and Electric Utili...

Pacific Energy Development Announces Restructuring of Debt Facilities in Anticipation of Previously Announced Merger

Pacific Energy Development Announces Restructuring of Debt Facilities in Anticipation o...

Neah Power Systems, Inc.: August 2015 Update to Shareholders

Neah Power Systems, Inc.: August 2015 Update to Shareholders

Scorpio Bulkers Inc. Announces Purchase of 552,481 Common Shares by Scorpio Services Holding Limited

Scorpio Bulkers Inc. Announces Purchase of 552,481 Common Shares by Scorpio Services Ho...

Power Engineering

Article Archives for Power Engineering Magazine

Continuing Education

Professional Development Hours

To access a course listing associated to a specific topic listed below, click on the topic of choice from the list below.

Latest Energy Jobs

View more Job Listings >>