B&W wins environmental controls contract for Alabama manufacturing plant

The Babcock & Wilcox Co. (NYSE: BWC) said its subsidiary, Babcock & Wilcox Power Generation Group Inc. (B&W PGG), has been awarded a contract to engineer, procure and construct (EPC) environmental control systems for three units at Ascend Performance Materials' Decatur, Ala. manufacturing plant.

B&W will design, supply and install three selective non-catalytic reduction (SNCR) systems for nitrogen oxides control and an industrial baghouse for particulate emissions control. The project scope also includes foundations, structural steel and construction services for the approximately $20 million project.

Engineering is underway, and work is scheduled to be completed in December 2012.

Read more new emissions projects news

Sponsored by FLSmidth

Related Articles

 Governors looking to expand renewable energy, natural gas

Governors looking to expand renewable energy, natural gas

The governors of Massachusetts, Connecticut and Rhode Island are joining forces to look for ways to increase the region's reliance on renewable energy sources while also expanding natural gas capacity.

 Gas, solar, wind generation will dominate in the future

Gas, solar, wind generation will dominate in the future

Of the planned or under construction generation projects tracked by GenerationHub for the period between 2015 and 2017, 95% of the projects, which total 135.3 GW, are either natural gas, solar or wind facilities, Kent Knutson, director of Hub Services for PennWell, said on Feb. 19.

Follow Power Engineering on Twitter
Latest News
Siemens signs contract with Thailand for 18 industrial gas turbines

Siemens signs contract with Thailand for 18 industrial gas turbines

The units -- purchased by TEC Project Services Corporation (TPS), a subsidiary of the Japanes...
GE is supplying two sets of high-efficiency steam turbines and generators for Petrovietnam’s new coal-fired thermal power plant in Soc Trang.

Petrovietnam selects GE's high-efficiency steam turbines for new coal-fired power plant

GE is supplying two sets of high-efficiency steam turbines and generators for Petrovietnam’s ...
Duke Energy Renewables acquires 50-percent stake in Mesquite Creek Wind

Duke Energy Renewables acquires 50-percent stake in Mesquite Creek Wind

Duke Energy Renewables has acquired a 50-percent stake in Mesquite Creek Wind, a 211-MW wind ...
Co-op signs power purchase agreement for solar project in Colorado

Electric co-op signs solar power purchase agreement

Tri-State Generation and Transmission Association Inc. signed a 25-year power purchase supply...
US construction spending at highest level in seven years

US construction spending reaches highest level in 7 years

U.S. construction spending in July climbed to its highest level in more than seven years, boo...
GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE is launching its latest aeroderivative gas turbine, the LM6000-PF+, which employs technolo...
Sendai nuclear Unit 1 in Japan connects to power grid Kyushu Electric Power Co.

Sendai nuclear Unit 1 connects to grid

The Sendai 1 nuclear power unit in Japan is expected to reach commercial operations, almost t...
EPA allows one claim to stand in Sierra Club appeal of Schiller air permit

EPA allows one claim to stand in Sierra Club appeal of Schiller air permit

U.S. Environmental Protection Agency (EPA) Administrator Gina McCarthy signed a July 28 order...

Power Engineering Current Issue

02/01/2015
Volume 119, Issue 2
1502PE-cover
Products Showcase
GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE announces launch of latest aeroderivative gas turbine, LM6000-PF+

GE is launching its latest aeroderivative gas turbine, the LM6000-PF+, which employs technologies from four GE businesses, bringing power online faster and more efficiently than ever before.

Dynamic Fluoride Ion cleaning DFIC of industrial natural gas turbines Hi-Tech Furnace Systems

Dynamic Fluoride Ion Cleaning of IGT Parts

The Dynamic Fluoride Ion Cleaning (DFIC) Process from Hi-Tech Furnace Systems is able to clean deep, narrow cracks of oxides by cycling between negative, atmospheric, and positive pressure.

Archived Articles

2000 | 2001 | 2002 | 2003 | 2004 | 2005 | 2006 | 2007 | 2008 | 2009 | 2010 | 2011 | 2012 | 2013 | 2014 | 2015

Power Industry Wire News

KPIT Selected by UPPCO to Deliver New SAP(R) Software Implementation and Electric Utility Transformation Project

KPIT Selected by UPPCO to Deliver New SAP(R) Software Implementation and Electric Utili...

Pacific Energy Development Announces Restructuring of Debt Facilities in Anticipation of Previously Announced Merger

Pacific Energy Development Announces Restructuring of Debt Facilities in Anticipation o...

Neah Power Systems, Inc.: August 2015 Update to Shareholders

Neah Power Systems, Inc.: August 2015 Update to Shareholders

Scorpio Bulkers Inc. Announces Purchase of 552,481 Common Shares by Scorpio Services Holding Limited

Scorpio Bulkers Inc. Announces Purchase of 552,481 Common Shares by Scorpio Services Ho...

Power Engineering

Article Archives for Power Engineering Magazine

Continuing Education

Professional Development Hours

To access a course listing associated to a specific topic listed below, click on the topic of choice from the list below.

Latest Energy Jobs

View more Job Listings >>